SOKKIA
top

Prisms

Imagen de un Prism

Features

  • Complete with mount, prisms, lens cap
  • 7260-31  AP31A Triple Non-Tilting Prism Assembly
  • 7261-31  AP32A Triple Tilting Prism Assembly
  • 7261-32  AP11A Single Tilting Prism Assembly

Targets

  • 7260-41  AP31T Target for 7260-33 AP31; attaches to top of mount with clamp screw
  • 7261-39  AP51 Target for Yoke-Mounted EDM; adjustable to match distance between optical axis of theodolite and EDM; accepts single-, triple-and nine-prism assemblies; target extensions (7261-43 AP51ET) available for long distance shots
  • 7261-41  AP32T Target for AP32; attaches to yoke in slide-in slot; clamp screws secure and center target
  • 7261-42  AP11T Target for AP11; attaches to yoke in slide-in slot; clamp screws secure and center target
  • 7261-43  AP51ET Oversize Target (Requires 7261-39 AP51)

Mount and Prisms

  • 7261-33  AP32 Triple Tilting Mount with fourth mounting hole to properly position a single prism; also has peep sight for aiming
  • 7261-34   AP11 Single Tilting Mount; has collimator-type sight for fast aiming
  • 7261-35  AP01 -40mm Prism (Limited quantities available)
  • 7261-37  AP12 Double Yoke Mount with VIal; tilting portion completely surrounded by yoke for versatility; bayonet mount on top and bottom; level vial on mount eliminates need for vial on prism pole
  • 7261-40  AP13 Target and Mount; for telescope-mounted EDM

Accessories

  • 7260-36  Replacement Bayonet Adaptor for AP31
  • 7260-46  AP43 Nine Prism Adaptor — requires three 7260-33 triple mounts.
  • 7261-36  AP01S -30mm Adaptor adapts AP Prisms to -30mm offset
  • 7261-44  AP30P Sighting Pole for AP31, AP32, AP11, AP12
  • 7261-48  Graduated Precise Prism Pole
  • 7261-50  AP41 Optical Plummet Tribrach Adaptor; accepts all mount and target assemblies; has 60" level vial for accurate leveling and centering, adjustable to match height of optical axis above tribrach; use with 7311-34
  • 7261-51  AP44 Tribrach Adaptor; like 7261-50 but no optical plummet; use with 7311-35
  • 7266-36   Lens Cap
  • 7311-34  WA1 Tribrach
  • 7311-35  WOA Optical Plummet Tribrach
  • 8078-50  Prism Pole Tripod
  • 8078-51  Prism Pole Point
  • 7261-34  System A: Single Prism, Tilting
  • 7261-35
  • 7266-42
  • 7311-50
  • 7311-34
  • 7260-33  System C: Triple Prism, Tilting
  • 7261-35
  • 7261-41
  • 7261-50
  • 7261-34
  • 7260-33  System D: Nine Prism, Stationary
  • 7261-35
  • 7260-46
  • 7261-50
  • Systems include -40mm Prism (7261-35). All systems may be ordered with -30mm prism (7266-35) as a substitute
  • Precision ground from one solid piece of optical glass
  • Stainless steel fittings for long wear
  • Can be mounted for either -40 or -30mm offset
  • Robber O-ring completely seals prism against moisture and contamination
  • Face diameter 2-5/16 in
  • Target and prism configuration ideal for total station instruments with co-axial telescope and EDM optical systems

-0/30 Prism Systems

  • 7266-32  Single Tilting Prism Assembly
  • 7266-45  Economy Prism in can. 0 or -30mm offset
  • 7266-48  Economy Prism with Target and Bayonet Base

Prism Accessories

  • 7260-36  Plastic Lens Cover
  • 7260-37  Retainer Screw

Retroprism Carrying Cases

  • Codura case with full zipper for easy access and storage of prisms; padded inside to protect against shock. Exterior is International Orange. Complete with sturdy carrying strap.
  • 7270-50  Case for Polycarbonate Prisms; 18-1/2(L) x 6-1/2(W) x 4-1/2(D) in
  • 7270-51  Case for Triple Prism; 12(L) x 7(w) x 4(D) in
  • 7270-52  Case for Single Prism; 12(L) x 7(w) x 4(D) in

Peanut® Retroprism

  • 1 in diameter
  • -30mm or 0 offset
  • 5/8 x 11 female thread
  • Complete with carrying pouch and accessories
  • Target and level vial included
  • 7268-32